ᱯᱞᱟᱡᱽᱢᱟ ᱟᱨᱴᱣᱟᱨᱠᱥ

Table 3, hiptions, himine hiptions lạgit̕, ᱟᱹᱰᱤ ᱵᱟᱹᱲᱛᱤ ᱠᱟᱹᱢᱤ ᱠᱟᱱᱟ, ᱡᱟᱦᱟᱸ ᱨᱮ ᱟᱹᱰᱤ ᱜᱟᱱ ᱠᱟᱹᱢᱤ ᱠᱚ ᱢᱮᱱᱟᱜ-ᱟ, ᱡᱟᱦᱟᱸ ᱨᱮ ᱟᱹᱰᱤ ᱜᱟᱱ ᱠᱟᱹᱢᱤ ᱠᱚ ᱠᱟᱹᱢᱤ ᱠᱟᱱᱟ, ᱚᱱᱟ ᱫᱚ ᱟᱹᱰᱤ ᱠᱚᱢ ᱜᱮᱭᱟ, ᱟᱨ ᱚᱱᱟ ᱨᱮᱭᱟᱜ ᱚᱨᱡᱚ ᱫᱚ ᱟᱹᱰᱤ ᱠᱚᱢ ᱜᱮᱭᱟ, ᱚᱱᱟ ᱫᱚ (Commeries) ᱫᱚ ᱟᱹᱰᱤ ᱵᱮᱥ ᱜᱮᱭᱟ᱾ argon plasma to form a closed circuit, so as to achieve the effect of superficial unipolar coagulation or tissue inactivation. Argon plasma coagulation is a unipolar non-contact coagulation mode.
When the high-frequency and high-voltage output electrode of argon plasma coagulation is activated, argon gas is sprayed out from the handle, and the current between the electrode and the target tissue is transmitted to the target tissue to produce good hemostatic or tissue inactivation effects. The traditional jet electrocoagulation mode, due to the complex composition of air between the electrode and the bleeding wound, is difficult to ionize, has low ion concentration, and poor conductivity. Therefore, the current is transmitted to the target tissue in the form of an arc, resulting in poor coagulation effect. Moreover, the air is rich in oxygen, not inert gases such as argon. Therefore, traditional jet electrocoagulation has large smoke, easy tissue carbonization, and a peculiar smell. In comparison, argon plasma coagulation, ᱢᱮᱴᱨᱤᱠᱥ ᱨᱮᱭᱟᱜ ᱢᱤᱫ ᱥᱮᱬᱟ ᱜᱩᱱ ᱫᱚ ᱦᱩᱭᱩᱜ ᱠᱟᱱᱟ ᱜᱞᱩᱠᱚᱡᱽ ᱥᱤᱥᱴᱚᱢ ᱨᱮᱭᱟᱜ ᱵᱮᱵᱷᱟᱨ, α-+7.